That did it, thanks!... I had to reboot the pub after for some reason... not sure why...
On Wed, Sep 30, 2015 at 4:55 PM, Brian Meade <[email protected]> wrote: > You need to make sure you have 2 universal device templates. One for the > users that have been provisioned and one for new phones set under the > Auto-registration section. > > On Wed, Sep 30, 2015 at 5:07 PM, Jonathan Charles <[email protected]> > wrote: > >> OK, cool... but as soon as I did that, I get a host not found on the new >> phones when they try to load the idle page... weird thing is I checked the >> URL that the phones picked up, and they open an XML page fine from that >> vLAN... >> >> >> Jonathan >> >> On Wed, Sep 30, 2015 at 1:27 PM, Brian Meade <[email protected]> wrote: >> >>> You need to make another Universal Device Template without the Idle URL >>> set and assign that to the user profile. >>> >>> On Wed, Sep 30, 2015 at 2:06 PM, Jonathan Charles <[email protected]> >>> wrote: >>> >>>> We are using Self Provisioning to have users configure their phones... >>>> >>>> https://CUCMPUB.bananaco.com:443/cucm-uds/xps/selfProvision >>>> >>>> Which works fine... except... after they login and the phone >>>> reconfigures, we still have the idle screen asking for them to login for >>>> self provisioning... how do we make this go away after they have >>>> provisioned their phone? >>>> >>>> >>>> >>>> Jonathan >>>> >>>> _______________________________________________ >>>> cisco-voip mailing list >>>> [email protected] >>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>> >>>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
