Make sure you don't have any of these on the dial-peer: voice-class sip pass-thru headers unsupp voice-class sip pass-thru content unsupp voice-class sip pass-thru content sdp
http://www.dslreports.com/forum/r27144625-Config-CME-8-Help-with-Incoming-calls-on-SIP On Mon, Oct 5, 2015 at 11:00 PM, Ryan Huff <ryanh...@outlook.com> wrote: > I have CME that has a SIP phone registered to it and a SCCP phone > registered to it. > SIP=4002 > SCCP=4001 > > I have a call path that looks like: > > CUCM->SIPTrunk->CUBE->SIPTrunk->CME > > When I dial the SIP phone (on CME) from call manager the call completes > and goes fine. When I dial the skinny phone (on CME) from call manager the > call immediately fails. However, from CME, using the skinny phone, I can > dial anything in call manager and the call completes. > > CCSIP on CME (for one of the failed calls) shows the INVITE then TRYING > then SIP/2.0 500 Internal Server Error. CCAPI INOUT shows a cause code of > 16, but this was anything but a normal clearing. Just for the hell of it, I > also added a transcoder in CME and registered it in telephony-service, just > to see if there was a codec flying around that I wasn't seeing .... but > alas, no. > > I've attached the ccsip and ccapi inout; I think I have just been starring > at it too long ... I can't see it. > > Thanks, > > Ryan > > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip