Everything looks good....
admin:utils ntp status ntpd (pid 19674) is running... remote refid st t when poll reach delay offset jitter ============================================================================== 127.127.1.0 .LOCL. 10 l 21 64 377 0.000 0.000 0.001 10.0.31.2 10.0.31.3 3 u 175 1024 377 0.635 -5.771 2.042 *10.0.31.3 129.6.15.29 2 u 970 1024 377 0.510 -11.340 0.449 10.1.31.2 10.0.31.3 3 u 490 1024 377 0.850 -9.114 4.881 +10.1.31.3 129.6.15.29 2 u 184 1024 377 0.817 -4.085 5.355 synchronised to NTP server (10.0.31.3) at stratum 3 time correct to within 68 ms polling server every 1024 s Current time in UTC is : Mon Nov 16 03:16:14 UTC 2015 Current time in America/Chicago is : Sun Nov 15 21:16:14 CST 2015 admin: admin:utils diagnose module validate_network Log file: platform/log/diag1.log Starting diagnostic test(s) =========================== test - validate_network : Passed Diagnostics Completed admin:# admin:utils dbreplication runtimestate DB and Replication Services: ALL RUNNING Cluster Replication State: Replication repair command started at: 2014-06-20-23-22 Replication repair command COMPLETED 541 tables processed out of 541 Errors or Mismatches Were Found: Use 'file view activelog cm/trace/dbl/sdi/ReplicationRepair.2014_06_20_23_22_51.out' to see the details DB Version: ccm8_6_2_20000_2 Number of replicated tables: 541 Cluster Detailed View from PUB (5 Servers): PING REPLICATION REPL. DBver& REPL. REPLICATION SETUP SERVER-NAME IP ADDRESS (msec) RPC? STATUS QUEUE TABLES LOOP? (RTMT) & details ----------- ------------ ------ ---- ----------- ----- ------- ----- ----------------- IPTCMS02 10.0.126.12 0.196 Yes Connected 0 match Yes (2) Setup Completed IPTCMS01 10.0.126.11 0.151 Yes Connected 0 match Yes (2) Setup Completed IPTCMP 10.0.126.10 0.065 Yes Connected 0 match Yes (2) PUB Setup Completed IPTCMS03 10.1.126.13 0.545 Yes Connected 0 match Yes (2) Setup Completed IPTCMS04 10.1.126.14 0.527 Yes Connected 0 match Yes (2) Setup Completed admin: On Sun, Nov 15, 2015 at 9:14 PM, Ryan Huff <ryanh...@outlook.com> wrote: > Also worth noting that if CCM NTP is synchronized to a Windows server > (even if it shows Stratum 3 or better); that is a problem you'll need to > correct as SNTP can play hell with UCOS and do some pretty weird stuff. > > Thanks, > > Ryan > > On Nov 15, 2015, at 10:06 PM, Ryan Huff <ryanh...@outlook.com> wrote: > > If the FROM CCM version was unrestricted, it would say "*Unrestricted*" > after the version number on the "*Active Master Version"* line. If it > does not say "*Unrestricted*", then it is the more common restricted > version. > > As to your original issue, I would start with all the usual suspects. Is > the FROM CCM cluster healthy to start with; dns, ntp, replication ... etc? > > From CCM: > > 1.) #utils diagnose module validate_network > (Should see *Passed*) > > 2.) #utils ntp status > (Pub should be synchronized and Strata 3 or better) > > 3.) #utils dbreplication runtimestate > (Should see *2 - Setup Completed* for all nodes) > > If PCD is moving the apps to a new platform/chassis, make sure the > *target* environment can reach all the same network assets as the *from* > environment. > > Thanks, > > Ryan > > On Nov 15, 2015, at 9:34 PM, Jonathan Charles <jonv...@gmail.com> wrote: > > It just says the version number... > > admin:show version active > Active Master Version: 8.6.2.20000-2 > Active Version Installed Software Options: > cmterm-7942_7962-sccp.9-3-1ES27-rel.cop > cmterm-devicepack8.6.2.24118-1.cop > ciscocm.refresh_upgrade_v1.1.cop > ciscocm.ucmap_platformconfig.cop > ciscocm.migrate-export-v1.12.cop > admin: > > > Jonahan > > On Sun, Nov 15, 2015 at 7:26 PM, Ryan Huff <ryanh...@outlook.com> wrote: > >> Did you actually dump the logs to a serial interface (curious what it >> shows)? >> >> On the FROM CCM, goto the CLI of pub (or sub) and do a "show version >> active"; it will tell you if you have the UNREST. >> >> Thanks, >> >> Ryan >> >> > On Nov 15, 2015, at 7:55 PM, Jonathan Charles <jonv...@gmail.com> >> wrote: >> > >> > Using PCD on CUCM 10.5.2.11901 got the following error: >> > >> > <image.png> >> > >> > It seems to imply I am not matching restricted vs. unrestricted... >> > >> > Any easy way to find out? >> > >> > >> > >> > Jonathan >> > _______________________________________________ >> > cisco-voip mailing list >> > cisco-voip@puck.nether.net >> > https://puck.nether.net/mailman/listinfo/cisco-voip >> > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip