It's not just you. we were hitting the hunt group disconnect with Extension Mobility. All users were logged out and it would disconnect also.
we got an ES (10.5.2.13038-1) and that seems to have fixed the hunt group log out disconnect issue. FWIW Scott On Mon, Nov 23, 2015 at 12:12 AM, Robert Schuknecht <rschukne...@gmx.de> wrote: > I was informed that i am hitting Bug CSCuv40352, which is caused by Bug > CSCus23371 <https://tools.cisco.com/bugsearch/bug/CSCuv40352/CSCus23371>. > > > > CSCuv40352: > > > > Hunt Pilot not forwarding call when members are unregistered > > CSCuv40352 > > Description > > *Symptom:* > Hunt Pilot not forwarding call based on the Call Forward Busy settings > when members assigned to the Line Group are unregistered. > > *Conditions:* > Caused by CSCus23371 <https://tools.cisco.com/bugsearch/bug/CSCus23371> > *Workaround:* > Downgrade to any version that does not contain CSCus23371 > <https://tools.cisco.com/bugsearch/bug/CSCus23371> > *Further Problem Description:* > CUCM configured with hunt pilots with their respective Hunt List and Line > Group. When all the IP Phones on this Line Group are unregistered, calls to > the Hunt Pilot are just getting disconnected. > We don't receive a busy tone, call just disconnects instead of being sent > to the number configured under Forward settings in the Hunt Pilot. > > Configuration under Hunt Call Treatment Settings in the Hunt Pilot is set > to send calls to voice mail (Forward Hunt No Answer and Forward Hunt Busy). > If one of the IP Phones associated to the Line Group is registered and keep > that phone > > logged out from the group, calls DO go to voice mail this time. > > > > > > CSCus23371: > > > > Location bandwidth leak on CUCM when logical partitioning is enabled. > > CSCus23371 > > Description > > *Symptom:* > Location bandwidth is not released when a call (Party A and Party B) is > redirected to Party C via huntlist with logical partition enabled. > > *Conditions:* > - when Logical Partition is enabled. > - when the call is redirected to a third party (Party C) that is not > available through a hunt list. > > *Workaround:* > None. > > > > > > As I found out another Workaround would be to use Call-Queuing under the > Hunt-Pilot. > > > > Thanks, > > > > Robert > > > > > > > > *Von:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *Im Auftrag > von *rschukne...@gmx.de > *Gesendet:* Sunday, November 22, 2015 10:41 PM > *An:* cisco-voip@puck.nether.net > *Betreff:* [cisco-voip] Call to Huntgroup drop when Group only contains > csf > > > > > > I am facing a strange Problem with Huntgroups which are containing only > CSF (Client Services Framework) devices. > > The huntpilot is configured to forward calls on busy and no Answer to a > voicemail-Pilot. Which is working when at least one csf device is > registered. It does not work when no csf device is registered. Then a call > for the Huntgroup is silently dropped. No busy tone or announcement. > > We are using CUCM Version 10.5.2 SU2. > > Any Hints See welcome! > > > > > > Regards, > > Robert > > > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
