Lelio,
Yes, you can remove the pre-installed VM's and deploy your own (with respect to the allowances of the TRC). The reason adding additional hardware isn't supported is because the Business Edition UCS chassis's are sold as a TRC (Tested Reference Configuration); meaning that Cisco has tested a variety of approved configurations on the platform with which TAC will support end-to-end. Configurations (hardware or software) outside those parameters have not been tested and could cause unplanned/unpredictable results with which TAC will not support. With the TRC stuff, you pretty much need to follow the DocWiki and deployment guides chapter and verse. If you'd like to be able to customize your UCS chassis and perhaps capitalize on co -residency allowances (again, within supported parameters), you'd want to look at something called a specs-based configuration or a data center product like a B series chassis. If you'd like to provide us with some detail on what your long-term objectives are with the upgrade and some demographics on your user/device population we might be able to give you some more informed insight. Hope that helps, = Ryan = Email: [email protected] Spark: [email protected] Twitter: @ryanthomashuff<http://twitter.com/ryanthomashuff> LinkedIn: ryanthomashuff<http://linkedin.com/in/ryanthomashuff> Web ryanthomashuff.com<http://ryanthomashuff.com> ________________________________ From: cisco-voip <[email protected]> on behalf of Lelio Fulgenzi <[email protected]> Sent: Thursday, December 3, 2015 3:45 PM To: cisco-voip voyp list Subject: Re: [cisco-voip] BE7K or not? Thanks for everyone's responses. I read on one of the pages that BE7K comes pre-loaded with UCCx 4 vCPU OVA, but I'm guessing that I can run whatever OVA I want as long as it fits? We were told that the BE7K is not customizable, even after ordering, so adding memory or anything like that is not permitted. This sort of makes me cringe. I like having the opportunity to add memory and/or additional NICs as with the other TRCs. Can't really justify it now, but as future versions come up, I'd like to have the ability to add more memory if the CUCM v11 or v12 version requires it. It's really only memory and NIC throughput that I can see having to increase and only as the apps demand more with each version. Lelio --- Lelio Fulgenzi, B.A. Senior Analyst, Network Infrastructure Computing and Communications Services (CCS) University of Guelph 519‐824‐4120 Ext 56354 [email protected] www.uoguelph.ca/ccs Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1 ________________________________ From: "Rob Dawson" <[email protected]> To: "cisco-voip voyp list" <[email protected]> Sent: Thursday, December 3, 2015 11:27:07 AM Subject: Re: [cisco-voip] BE7K or not? The newest BE7ks are built on C240 M4 hardware. The BE7H-M4-K9 is 20 cores, 128 GB RAM, 4+ TB of available disk space, the BE7M-M4-K9 is 12 cores, 64 GB RAM, and around 2.6 TB available disk. Cisco states on the data sheet that BE7k is “optimized for enterprise-scale organizations with 1000 to 5000 users and 3000 to 15,000 devices” but they also note “For more capacity to support larger sized deployments, simply stack additional servers. And in smaller sized deployments with less than 1000 users, typically more applications can be supported per server.” I haven’t seen any practical limitations, and as pointed out by someone else you can use the VM Placement Tool to see what OVAs fit, and scale to size. Rob From: cisco-voip [mailto:[email protected]] On Behalf Of Lamont, Joshua Sent: Thursday, December 03, 2015 10:21 AM To: Lelio Fulgenzi Cc: cisco-voip voyp list Subject: Re: [cisco-voip] BE7K or not? Sorry for the confusion... We had originally planned to install C240 M3s but swapped them out for the C240 M4s instead. Joshua Lamont Senior Telecommunications Engineer Brown University office (401) 863-1003 cell (401) 749-6913 On Thu, Dec 3, 2015 at 10:14 AM, Lelio Fulgenzi <[email protected]<mailto:[email protected]>> wrote: There are BE7Ks built on the new UCS C240 M4s. Or by "new" do you mean something else other than the 240M4s? --- Lelio Fulgenzi, B.A. Senior Analyst, Network Infrastructure Computing and Communications Services (CCS) University of Guelph 519‐824‐4120 Ext 56354<tel:519%E2%80%90824%E2%80%904120%20Ext%2056354> [email protected]<mailto:[email protected]> www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1 ________________________________ From: "Joshua Lamont" <[email protected]<mailto:[email protected]>> To: "Matthew Loraditch" <[email protected]<mailto:[email protected]>> Cc: "Lelio Fulgenzi" <[email protected]<mailto:[email protected]>>, "cisco-voip voyp list" <[email protected]<mailto:[email protected]>> Sent: Thursday, December 3, 2015 10:02:47 AM Subject: Re: [cisco-voip] BE7K or not? We're in the process of converting to Cisco UC and recently during our design phase swapped out the BE7Ks in favor of the new UCS C series severs. C240 M4s are used for the majority of our cluster. Joshua Lamont Senior Telecommunications Engineer Brown University office (401) 863-1003<tel:%28401%29%20863-1003> cell (401) 749-6913<tel:%28401%29%20749-6913> On Thu, Dec 3, 2015 at 9:46 AM, Matthew Loraditch <[email protected]<mailto:[email protected]>> wrote: http://tools.cisco.com/ucs is your friend, pick your server model and the ovas you will use. In general though BE7K should be fine. No limitations besides overall resources. Just gotta figure out how many you need or want Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA Network Engineer Direct Voice: 443.541.1518<tel:443.541.1518> Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts> From: cisco-voip [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Lelio Fulgenzi Sent: Thursday, December 3, 2015 9:38 AM To: cisco-voip voyp list <[email protected]<mailto:[email protected]>> Subject: [cisco-voip] BE7K or not? We're spec'ing out some new UCS servers for our next upgrades. Still trying to figure out what, if any, limitations going with a BE7K might have. Does anyone care to share a reason why we shouldn't go with BE7K, or why we shouldn't go with a la cart using the BOM? There was once an issue with a limitation of users/devices, but I think that's gone now. My biggest concern is trying to do something on the BE7K and finding out only after that it's not allowed or supported. Any ideas would be great. Lelio --- Lelio Fulgenzi, B.A. Senior Analyst, Network Infrastructure Computing and Communications Services (CCS) University of Guelph 519‐824‐4120 Ext 56354 [email protected]<mailto:[email protected]> www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1 _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
