This happens when the CUBE receives the prompt from the ITSP over RTP and is not aware of where it has to stream this prompt because CUCM does Delayed Offer by default. So Cube doesnt have the phone's IP address.
You can fix this by forcing CUCM to send provisional acknowöedgement by: 1. putting voice-class sip rel1xx require "100rel" on the dial peers facing CUCM, and 2. Under sip profile of sip trunk facing CUBE, change the Rel1xx parameter to Send Prack for all 1xx messages. Sreekanth Sent from a phone. -------- Original message -------- From: Asim Mekki Basheer <[email protected]> Date: 5/23/16 4:37 PM (GMT+05:30) To: [email protected] Subject: [cisco-voip] No ring back Tone For Switched off Mobile Hi The issue is, when call out to a Switched off mobile phone, the IP Phone can't hear the correct ringback tone either Busy Tone nor Service Provider's Ringtone, it hears normal Ringback tone same as when the mobile phone switched on instead The call flow: IP Phone -- CUCM -- SIP Trunk-- CUBE --SIP Trunk -- Service Provider . (CUCM 7.5, VGW (2921) Regards
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
