CUCM and IMP won’t have an issue and will pick up the new vCPUs during boot, though you really shouldn’t have any performance issues if you are sized appropriately and honoring what the OVA configures.
From what I recall CUC sets the number of CPUs during install and won’t use any additional ones added afterwards. -Ryan On May 26, 2016, at 5:56 PM, Alessandro Bertacco <[email protected]<mailto:[email protected]>> wrote: Because After Upgrade to V11 from V10.5, and moving Virtual Machine to ESXi5 to ESX6, during boot and during service start up CPU are always 100%, and booting Up are Slow as Old Snail!! Note that Virtul Machine now Run on SSD Disk Storage!! AB Da: Ryan Huff [mailto:[email protected]] Inviato: giovedì 26 maggio 2016 23:44 A: Alessandro Bertacco <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]> Oggetto: Re: [cisco-voip] Add CPU on UC infrastructure I would first answer your question, with a question of my own. Why do you need to add additional CPUs to your UC virtual? Thanks, Ryan Thanks, Ryan On May 26, 2016, at 4:33 PM, Alessandro Bertacco <[email protected]<mailto:[email protected]>> wrote: Hi Guys, I need to give more CPU resource to my CUCM, CUC, and IM&presence version 11. Which will be the impact of modifying virtual hardware of the Machine? Thank you Regards Alessandro Bertacco _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
