Since you're using MGCP, it should be pretty easy to set this on each PRI by Setting "Calling Party IE number type unknown" to "National" and Calling Numbering Plan to "ISDN":
[image: Inline image 1] You can also set "Calling Party Number Type" and "Calling Party Numbering Plan" on your route patterns or route list configurations. This method won't require resetting your PRIs. On Thu, Aug 25, 2016 at 5:22 PM, Brian Meade <[email protected]> wrote: > Yea, VoLTE requires actually setting the calling number plan/type in the > ISDN messages. You'll need to make sure you're set to ISDN/National and > sending 10 digits for outbound calls. > > On Thu, Aug 25, 2016 at 5:13 PM, Sam Jones <[email protected]> wrote: > >> Anyone experienced an issue with Caller ID displaying Unknown or >> Restricted to a VoLTE enabled cell phone. Calls only from the Call Manager >> side get a Unknown or Restricted Caller ID. Calls from our Legacy PBX >> display fine on the VoLTE enabled cell phone. >> >> CUCM 10.5 -> MGCP -> Voice Gateway -> PRI -> PSTN >> >> >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
