We are also seeing the phones get disconnected with multi auth enabled and when 
computers are connected or disconnected from the phone PC port (docking 

From: Hendrix, Bill W. - US
Sent: Saturday, September 17, 2016 2:00 PM
To: 'cisco-voip@puck.nether.net'
Subject: dot1x multi domain phones prompt for login


  We have some ports where we applied multi-domain authentication on ports with 
Cisco phones connected for phone profiling.  We are using ISE.  However, the 
phones prompt for username and password.  Do the phones require any dot1x 
configuration to do this?  Or is this a setting in ISE causing this?

Bill Hendrix
cisco-voip mailing list

Reply via email to