OK, I figured out a workaround without patching...

The trick is to make sure you create slot 0/0/0 in your template for both
module 2 and 4... if you do just 2, it fails.If you do both, it works fine..

I have confirmed this on the VG350, it should work on the 320 too.



Jonathan

On Tue, Sep 27, 2016 at 11:15 PM, Jonathan Charles <jonv...@gmail.com>
wrote:

> Thanks!
>
> On Tue, Sep 27, 2016 at 9:53 AM, Wes Sisk (wsisk) <ws...@cisco.com> wrote:
>
>> CSCus83367    BAT- Error when trying to update values for slots of VG350
>> SCCP gateway
>>
>> https://bst.cloudapps.cisco.com/bugsearch/bug/CSCus83367
>>
>> -Wes
>>
>> On Sep 25, 2016, at 9:39 PM, Jonathan Charles <jonv...@gmail.com> wrote:
>>
>> So, when I try to BAT in the VG350, it fails on module 4 and kicks error:
>>
>> 2036 DOMAIN NAME MAC Address already exists.
>>
>> On every port...
>>
>>
>> Any way to work around it, I have a lot of these to add...
>>
>>
>>
>> Jonathan
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to