No, actually now using g711 for all regions and prioritizing g711 on incomming dial-peer on the voice gateway
2016-11-03 10:47 GMT-02:00 Brian Meade <[email protected]>: > Are you doing G.729 for calls from phones? Press "?" twice for an active > call on 79XX series to see the negotiated codec. > > The CTS 500 only supports G.711 and AAC-LD which is probably your issue- > http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/ > telepresence-system-500/data_sheet_c78-468517.html > > You'll need to make sure the regions are set up so G.711 is allowed to the > gateway from the CTS 500 region. > > On Thu, Nov 3, 2016 at 8:43 AM, Nilson Costa <[email protected]> wrote: > >> >> Hello all, >> >> I have a CTS 500 on my company which we want to enable pstn calls on it >> but whenever we try to make a call using this equipament it invoke >> transcoding no matter what region I use on CUCM. >> But when I pull the handset from the phone the call goes normally without >> invoke the transcoding. >> Can you help find what am I missing ? >> >> We have CUCM 11, 1 local voice gateway 2811, connected to the PSTN >> through a E1 R2 digital trunk. And the CTS500-37 have the active load >> CTS_1.10.13(5)_P1 and a 7975 as dial- phone >> >> Very best regards >> >> >> -- >> Nilson Lino da Costa Junior >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> > -- Nilson Lino da Costa Junior
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
