Hi Mike, apologies yes this is with CUBE, that looks good I will give this a try, they are already in 15.4 so will try inbound first, many thanks for your suggestion. KR, Nick
On 28 November 2016 at 23:03, Norton, Mike <[email protected]> wrote: > Is there a CUBE? You don’t say, but I’m assuming so. I would do something > like this on the CUBE: > > > > request ANY sip-header From modify "^(.+):.*<sip:(.+)@" "\1: \"\2\" > <sip:\2@" > > > > That should take the part of the SIP address before the @ and put it at > the beginning in quotes like the old provider did. If any calls do come in > with an actual name, this will wipe that name out (not sure if that’s > desirable/relevant). > > > > Just remember that using SIP profiles for inbound requires IOS >= 15.4 and > that inbound profiles has to be explicitly turned on. Alternatively, doing > it on an outbound profile towards CUCM might meet your needs as well. > > > > -mn > > > > *From:* cisco-voip [mailto:[email protected]] *On Behalf > Of *Nick via cisco-voip > *Sent:* November-26-16 2:21 AM > *To:* [email protected] > *Subject:* [cisco-voip] SIP Profile to add Calling Name > > > > Hi All > > > > I have a situation where we have migrated from one SIP trunk to another, > when the inbound call comes in, the IP phone handset shows Unknown Caller > ID and then display the calling number below, this client has 6921 handsets > throughout which will only display one line so they only see the Unknown > Caller ID on the handset. > > > > The Invite on the old SIP trunk show the From field with the > calling number in brackets in front of the SIP portion as below and this > works fine. > > *From: > "07918900845"<sip:[email protected];user=phone>;tag=SDtmhce01-87069* > > > > The invite on the new SIP trunk does not display the number in front of > the From field as below > > > > *From: <sip:[email protected];user=phone>;tag=3689138628-619971* > > > > What I would like to do is modify the From field in the invite so that it > displays the calling number in front of the as per the above example. > > > > It appears to be an issue with Calling Name as if I receive the call on a > translation pattern on CUCM and set Calling Name Presentation to > Restricted, I don't see the Unknown Caller ID anymore, the issue with this > is that Missed calls / Received Calls lists on the phone shows Private > Number. > > > > Can this be done with a inbound SIP Profile or SIP normalisation script? > > > > Regards > > > > Nick > > > > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
