Hi Anthony, In my deployment , we are using CE devices like dx, sx and mx devices. And i have seen these devices failover to the backup cucm a couple of times. I did not know this was unsupported.
Just to clarify i dont have Jabber over MRA due to 2-factor requirements which i have not been able to iron out, so cant comment on this behavior on Jabber. Regards, Ankur On Jan 13, 2017 00:13, "Anthony Holloway" <[email protected]> wrote: > *Setup* > Single Expressway-E (X8.7) > Single Expressway-C (X8.7) > CUCM Pub (11.0) > CUCM Sub (11.0) > CMG Sub > Pub > > *Execute* > All desk phones and soft-phones are currently registered to CUCM Sub > Drop CUCM Sub for maintenance > All desk phones and soft-phones unregister and stay this way > Switch CMG to Pub > Sub > All desk phones and soft-phones register to CUCM Pub > > According to the Jabber 11.8 deployment guide, there is a table which says > failover/high availability is not yet supported for audio/video. > > http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/ > 11_8/cjab_b_planning-guide-jabber-118/cjab_b_planning- > guide-jabber-118_chapter_010.html#CJAB_RF_S96EC4E9_00 > > None of the 7800/8800/DX/Expressway/MRA documentation states that this is > unsupported, however, I may just be over looking it. > > Can anyone help me find that info, or have some personal experience to > share? > > Thanks. > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
