However, Export UDP All Details, and then re-insert All Details works So… Insert device - Specific Details with the field header of “Forward all Voice Mail 1” fails And Insert device – All Details with the field header of “Forward all Voice Mail 1” works fine.
This is annoying. But I can make it work. From: cisco-voip <[email protected]> on behalf of Dana Tong <[email protected]> Date: Wednesday, 19 April 2017 at 2:26 pm To: "[email protected]" <[email protected]> Subject: [cisco-voip] CUCM 9 to 11.5 BAT fields This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing<http://aka.ms/LearnAboutSpoofing> Feedback<http://aka.ms/SafetyTipsFeedback> Hi all, I have an annoying issue with BAT v11.5. I have exported phones and UDP etc from CUCM version 9 to version 11.5. BAT reports “FORWARD ALL VOICE MAIL” is not a supported field. However, when I insert the devices (specific details) based on a template and then export all details on V11.5 those field headings are exactly the same (when comparing the version 9.1 export and the 11.5 export). Has anyone encountered this issue and can suggest a fix? I’d like to re-insert the configuration with the correct values as there are many people who forward to other destinations (instead of voicemail). Cheers Dana [cid:[email protected]]
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
