Bill,
Verify that CDP and power inline auto are enabled from the port configuration perspective then from the enable prompt, what is the available/used wattage output of "show power inline"? Thanks, Ryan ________________________________ From: cisco-voip <cisco-voip-boun...@puck.nether.net> on behalf of Ryan Huff <ryanh...@outlook.com> Sent: Monday, July 10, 2017 1:28 PM To: Hendrix, Bill W. - US; cisco-voip@puck.nether.net Subject: Re: [cisco-voip] 8841 no power connecting to 4510/4748 it show up CDP? Thanks, Ryan ________________________________ From: cisco-voip <cisco-voip-boun...@puck.nether.net> on behalf of Hendrix, Bill W. - US <george.hend...@caci.com> Sent: Monday, July 10, 2017 1:14 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] 8841 no power connecting to 4510/4748 Hey guys, I am testing an 8841 on a switch we have, but the switch doesn’t seem to be detecting the phone. Phone info: 8841 - sip88xx.11-5-1SR1-1.loads Switch info: Switch WS-C4510R+E Supervisor: WS-X45-SUP7-E (03.04.05.SG.151-2.SG5) WS-X4748-RJ45V+E version 1 I also tested it in a WS-X4148-RJ45V slot, but it also doesn’t work. Phone powers up fine connecting to a 3560G running 15.0 IOS. Thanks, Bill Hendrix
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip