Thank for the Sean,

I was looking for more of a soft reset of the newer 88XX devices.



> On 10 Aug 2017, at 13:04, Sean E. Knight via cisco-voip 
> <cisco-voip@puck.nether.net> wrote:
> 
> Reset the Phone to the Factory Settings from the Phone Keypad:
> 
> Remove power from the phone in one of these ways: Unplug the power adapter. 
> ...
> 
> Wait 5 seconds.
> 
> Press and hold # and plug the phone back in.
> 
> When the Headset and Speaker buttons are lit, release # and enter the 
> following key sequence: 123456789*0#
> 
> -----Original Message-----
> From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jon 
> Fox
> Sent: Thursday, August 10, 2017 4:38 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] 88XX Soft Reset
> 
> Hello All,
> 
> Is there soft reset key press sequence on the Cisco 88XX (8841/8851) Devices.
> 
> I remember that there was the **#** key press on the 7940/7940 devices. is 
> there a similar on for these newer phone models?
> 
> Many thanks
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to