I followed the directions listed here on an 8865 running firmware 11.7(1)
and the options I see for bandwidth are Auto, 2 Mbps, 1.5 Mbps, 1.0 Mbps,
750 Kbps, 500 Kbps, and 250 Kbps. Auto seems to be the default selection,
so I would assume worst case is a 2 Mbps call - but the actual max rate
gets negotiated for each call and depends on other things like the UCM
settings for Region/Device Pool or the Service Parameters for the default
intra/inter region bit rates. Does that help?

On Thu, Aug 10, 2017 at 6:03 PM, Jason Aarons (Americas) <
jason.aar...@dimensiondata.com> wrote:

>
>
> Trying to find the 8845/65 information on video calls and per video call
> bandwidth usage.  Strictly 8845/65 to 8845/65.
>
>
>
> Jason Aarons, CCIEx No. 38564
>
> Advanced Technology Consultant
>
> Dimension Data
>
> 904-338-3245 <(904)%20338-3245>
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer";
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to