I realize down scaling is a thing, but its still kind of funny that these
phones can capture, encode and decode 720p, but only have an 800x480
If you are only interested in like-to-like desktop models, then you likely
don't need 2Mbps at 720p.
Something along the lines of 480p30fps at 768kbps for audio and video
should be fine, I would think.
But what do I know. Video bandwidth is black magic anyway.
On Thu, Aug 10, 2017 at 5:18 PM Dave Goodwin <dave.good...@december.net>
> I followed the directions listed here on an 8865 running firmware 11.7(1)
> and the options I see for bandwidth are Auto, 2 Mbps, 1.5 Mbps, 1.0 Mbps,
> 750 Kbps, 500 Kbps, and 250 Kbps. Auto seems to be the default selection,
> so I would assume worst case is a 2 Mbps call - but the actual max rate
> gets negotiated for each call and depends on other things like the UCM
> settings for Region/Device Pool or the Service Parameters for the default
> intra/inter region bit rates. Does that help?
> On Thu, Aug 10, 2017 at 6:03 PM, Jason Aarons (Americas) <
> jason.aar...@dimensiondata.com> wrote:
>> Trying to find the 8845/65 information on video calls and per video call
>> bandwidth usage. Strictly 8845/65 to 8845/65.
>> Jason Aarons, CCIEx No. 38564
>> Advanced Technology Consultant
>> Dimension Data
>> 904-338-3245 <(904)%20338-3245>
>> This email and all contents are subject to the following disclaimer:
>> cisco-voip mailing list
> cisco-voip mailing list
cisco-voip mailing list