You want to dial x.x....@domain.com based on that example. Just use the dots, not stars. I've also seen people setup for x.x.x.x@ip dialing where ip is the literal "ip".
On Wed, Nov 22, 2017 at 8:42 AM, Anderson D'Assunção < anderdassun...@gmail.com> wrote: > > IMG_20171121_143816505.jpg > <https://drive.google.com/file/d/1-3PrGfwCedq19f_88qsihzY3PiI2EN9a/view?usp=drive_web> > > IMG_20171121_143807137_HDR.jpg > <https://drive.google.com/file/d/1lE-WUp6q4s2CZluDs_7r8OiRyrmkJKys/view?usp=drive_web> > > Hi Guys, > > I'm with a litle issue with sx20 or sx10 dial IP address from remote > control by the user. > > As the document with link bellow. I'm using to dial on video endpoints > registered on CUCM to IP Address with * . Example : 200*10*10*10 > > https://www.cisco.com/c/en/us/support/docs/unified- > communications/telepresence-video-communication-server- > vcs/118884-config-vcs-00.html > > When the user tries to put the third * , sx20 or sx10 automatically > changes to . , so, user needs to backspace and put * again. > > Do we have some configurations to make sx10 and sx10 does not change > automatically * for . ? > > I didn't find anything about this. > > thanks > > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
