You can register your Polycom endpoints on the VCS with SIP or H323 with whatever SIP URI or H323 ID of choice. Unless there are other requirements you didn't mention, this should let you more easily connect calls to these Polycoms by putting them on the VCS.
On Wed, Nov 29, 2017 at 9:42 AM, Anderson D'Assunção < [email protected]> wrote: > I know that CUCM can support 1.1.1.1@ip or 1*1*1*1, but > > Do the CUCM or VCS supports SIP Video calls dialing like this? > > 1.1.1.1##2562 > 1.1.1.1#1420 > [email protected] > [email protected] > > > Is there any way to solve this kind of dialing to policom equipments? > > i'm not able to make sip trunks because they are Polycom standalone. > > > > I just would like to confirm if it's possible or not > > thanks and regards > > > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
