If you really don’t want mac changing then you should use a static mac address 
on the VM, similar to ELM/PLM.

https://kb.vmware.com/s/article/219

-Ryan

On Dec 5, 2017, at 6:48 AM, Nathan Reeves 
<[email protected]<mailto:[email protected]>> wrote:

Licensing on the expressway VM's is tied to the BIOS UUID (uuid.bios) and the 
Ethernet0 MAC Address (ethernet0.address) of the VM's.  The Serial number (and 
subsequently generated Release Keys based on the Serial number) should remain 
the same across upgrades.  Moving the VM between ESXi Hosts (assuming a VMware 
cluster) should not impact the Licensing in any way.  Move of the machine to a 
new host manually will most likely prompt asking if you copied or moved, I 
would suggest choosing moved, but not 100% sure that this maintains the machine 
UUID or just the VC uuid.

Recovery wise, you can record the UUID and Mac address (grab the VMX file from 
the ESXi host) of the current VM's, along with the Serial and Release keys.

Once you've deployed the new VM from OVA, manually update the VM vmx file:
- Remove the VM from Inventory (not delete from disk).
- Download the new vmx file, update the uuid.bios and ethernet0.address values, 
and then upload to the VM folder on the ESXi Datastore.
- Right click on the vmx file and choose 'Add to inventory'.

This ~should~ end up giving you the same serial number on the VM on boot and 
allow you to re-enter the release keys.  If you don't see the same serial 
number, double check your values in the vmx.


HTH

Nathan

On Tue, Nov 28, 2017 at 10:52 PM, Lelio Fulgenzi 
<[email protected]<mailto:[email protected]>> wrote:

I'm new to the Expressway world, so new, we had a partner come in and help us 
set them up. :O

We had a weird experience with the licensing with one host, which needed manual 
intervention, but for the most things went ok.

This raises the question, however, of how I can plan to move these VMs to 
another host, upgrade them, then move them again.

As far as I can tell, the serial number to which the license is tied is 
generated at installation time and is not changed when a VM is moved, but I'm 
not sure this holds when the expressway o/s is upgraded.

My goal is to upgrade the 4 vm cluster (2C+2E) offline then move them to the 
online network, rebalancing our ESXi hosts as we do this.

I understand that even if we are successful in moving the VMs without rehosting 
the license, if we ever encounter a situation where we need to recover from 
backup, we need to consider if this will fail because of the licenses or is 
there a way around that?

Thoughts?

Lelio

_______________________________________________
cisco-voip mailing list
[email protected]<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
[email protected]<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to