We are getting a 404 on inbound calls to the recorded destination from the QM CR in response to the CCM invite on the recording trunk... I am at a loss here. Is there a place to configure the recording pilot number (we are sending 7777 as our recording pilot to the SIP trunk...)
Jonathan On Fri, Jan 12, 2018 at 2:22 PM, Anthony Holloway < [email protected]> wrote: > I can't tell which direction you're referring to the 503 coming from, but > in my experience CUCM will 503 you for two reason at least: > > 1) You didn't add the IP address which is sending to you, to a SIP trunk, > so CUCM rejects the call > > 2) You need to bounce the SIP trunk again (and maybe even 3 or 4 more > times just to be sure) > > If you were meaning that QM sends the 503, it's possible QM is doing the > same, and you are sending from a CUCM node that QM wasn't expecting to > receive an INVITE from, or you just need to bounce the QM "sip trunk" which > is probably one of the services I can't think of at the moment. > > On Wed, Jan 10, 2018 at 8:58 PM Jonathan Charles <[email protected]> > wrote: > >> So, Built in bridge is enabled, sip trunk to Calabrio is set up... but >> when the call hits QM, we get a 503 Service Unavailable... >> >> Not seeing a lot of documentation on what would cause this... >> >> Any pointers to a direction? >> >> >> Jonathan >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
