Hello All,
Wondering if you can provide some assistance.
We had a issue recently with regards a clients location based can
configuration. TAC provided some details but I was a little confused about
their response.
Let me try and explain the set up (its really rather basic)
PHONES (LOCATION_A) >>>> SIP TRUNK (LOCATION_B) >>>>TO SIP PROVIDER
SITE_A PHONES USING > LOCATION_A >>> LINKED ONLY WITH >>> HUB_NONE (AUDIO
BANDWIDTH 1800kbps)
SIP_TRUNK USING > LOCATION_B >>> LINKED ONLY WITH >>> HUB_NONE ( AUDIO
BANDWIDTH 4812kbps)
But there is no association/Link "directly" between LOCATION_A and LOCATION_B
Would this cause issues? I was under the impression that the locations had to
be fully linked for this to work correctly.
Cisco Tac response was this:
SITE_A is using the location LOCATION_A which has 4812Kbps of bandwidth for
Audio. We don’t need to do associate LOCATION_B to LOCATION_A. The reason is
all location are association to HUB_NONE.
Hope that's clear, any assistance would be most useful.
Many thanks.
Jon
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
