Bill, Do you see the MWI messages showing up in the QSIG debugs?
If it's showing up there, I think something like this may work: voice service voip qsig decode telephony-service voicemail <number> ephone-dn <tag> mwi qsig from https://supportforums.cisco.com/t5/collaboration-voice-and-video/qsig/ta-p/3126953 On Mon, Jun 4, 2018 at 5:04 PM, Hendrix, Bill W. - US < [email protected]> wrote: > Hey guys, > > > > We have a CME system that has been working with via a T1 PRI QSIG > connection. MWI and voicemail worked fine with Unity Connection. The > users on this system have been migrated to Exchange UM. Voicemail is > working but not MWI. With the Exchange integration, it’s a SIP trunk and > from Exchange and CUCM, then it goes thru an MGCP gateway via QSGI digital > PRI to the CME router. With Exchange, there are no MWI numbers for CME to > point to. Anyone have any insight on what to do to get this working? The > T1 link cannot be converted to SIP. > > > > Exchange <SIP> CUCM <MGCP> Gateway <QSIG PRI> CME > > > > Thanks, > > > > Bill > > [email protected] > > > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
