SIP is bound to the outside interface going to the ITSP: bind control source-interface GigabitEthernet0/0/0 bind media source-interface GigabitEthernet0/0/0
* Tried to bind it to the dial-peer as well No response from carrier IP is for outbound Invite is my public IP configured on gi0/0/0 [cid:[email protected]] Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Brian Meade<mailto:[email protected]> Sent: Friday, August 10, 2018 8:52 PM Subject: Re: [cisco-voip] CUBE ignoring SDP responses from ITSP What does your SIP bind config look like? What IP addresses do you see in the 1XX response from the carrier? What is the IP in the Contact header for the outbound invite? On Fri, Aug 10, 2018 at 6:42 PM Benjamin Turner <[email protected]<mailto:[email protected]>> wrote: Hey guys, Ran out of options. I have a new CUBE deployment to Bandwidth.com SIP provider and I see the SDP invites going out the egress interface and running a monitor capture on the CUBE, I see the return 1xx responses but still not seeing them on the debug messages. So, CUCM sends a CANCEL after not receiving any reply’s from the CUBE. The kicker is the call still connects. Any help at this point will be great. Thanks, Ben Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
