I don’t know what the problem is either. Maybe if you grab ccapi inout debugs at the same time, your voice service voip section (at least, whole config would be better), sh ver, and show run | sec voice. Maybe even do a debug ccsip all if you have the ability to do that and NOT crash your CUBE. Obviously don’t debug ccsip all without thinking about what that will do.
Even with all of that, I’m not sure I’ll have an answer, but I’ll look. I’ve had similar issues with my CUBEs and it was due to binding issues and another time it was a straight up bug and I had to bounce the box (which “fixed” it). I don’t know why your initial debug was showing “could not add ccb to table” and I’m not even sure which CCB it’s talking about. My thoughts were that is customer callback… but I’m probably wrong on that one. Nick On Thu, Oct 11, 2018 at 11:11 AM Anthony Holloway < avholloway+cisco-v...@gmail.com> wrote: > I feel obligated to reply, since I chimed in earlier....unfortunately, I > don't have any ideas for you. In fact, I have seen CUBE just ignore > incoming SIP messages before, both OPTIONS and INVITEs alike. Not many > occasions, just a few. I have never gotten resolution on it, it has either > fixed itself, or in one special case, still happens. It's my own, in > fact. It still randomly ignores inbound INVITES from my ITSP. Fixing it, > is on my to-do list, but... The cobbler's children are always the > worst-shod > <https://english.stackexchange.com/questions/46681/a-saying-indicating-how-some-professionals-dont-apply-their-skills-for-themselv>. > The Calls Per Second on my CUBE is like 1.7, however, there are no other > calls being setup, torn down, sup service, etc, and CUBE still just ignores > its responsibility. > > On Thu, Oct 11, 2018 at 9:51 AM Maciej Bylica <mbgathe...@gmail.com> > wrote: > >> Hello >> >> Do you have an idea how to get around this problem? >> Have you ever encountered such limitations in the process of processing >> OPTIONS packages? >> >> Thanks >> Maciej. >> >> śr., 10 paź 2018 o 09:13 Maciej Bylica <mbgathe...@gmail.com> napisał(a): >> >>> Hello >>> >>> Anthony, thanks for the hint, but you were right this is not the core of >>> the issue. >>> >>> I made some test via sipp with following results >>> 1) >>> Test: Send 15xOPTIONS with the same Call-ID and From-tag >>> Result: All OPTIONS were replied >>> >>> 2) >>> Test: shortly after completing the above test I made another test: Send >>> 15xOPTIONS with the same Call-ID as previously but different From-tag. >>> Result: None of the OPTIONS we’re replied. >>> >>> 3) >>> Test: Test 2 was re-run after a while >>> Result: All OPTIONS were replied >>> >>> So it seems Cisco records the Call-ID and From-tag somewhere in memory >>> and drops subsequent OPTIONS with the same Call-ID and different From-tag >>> that come from the same endpoint for some time. >>> >>> I have similar situation here. >>> The customer we are trying to connect sends several OPTIONS within >>> miliseconds. >>> First OPTIONS is replied properly, but subsequent packets with the same >>> Call-ID and different From-tag dropped. >>> >>> Is there any solution for this. >>> Our customer is very reluctant to proceed with any changes (another open >>> source SIP proxies replies all the OPTIONS). >>> >>> Thanks >>> Maciej. >>> >>> wt., 9 paź 2018 o 23:45 Anthony Holloway < >>> avholloway+cisco-v...@gmail.com> napisał(a): >>> >>>> I hope you saw that I wrote "Pseudo Config" and don't just try to copy >>>> and paste that. I'm also not very convinced that this is the core of your >>>> issue, but you're more than welcome to give it a try. >>>> >>>> You said the first OPTIONS does respond, so I'm guessing it's not going >>>> to be a binding error. In fact, if it was a binding error, OPTIONS would >>>> still respond, it would just have wrong IP info in the headers. >>>> >>>> Anyway, good luck with that test. >>>> >>>> On Tue, Oct 9, 2018 at 3:54 PM Maciej Bylica <mbgathe...@gmail.com> >>>> wrote: >>>> >>>>> Thanks, i am about to modify the config to check. >>>>> >>>>> Many thanks >>>>> >>>>> >>>>> wt., 9 paź 2018 o 20:58 Anthony Holloway < >>>>> avholloway+cisco-v...@gmail.com> napisał(a): >>>>> >>>>>> OPTIONS does not have to match a dial peer to work. However, if you >>>>>> are going to match a dial peer at all, it would likely be for the express >>>>>> purpose of replying from the correct interface, if you have more than one >>>>>> potential interfaces, and you for some reason cannot bind globally. Thus >>>>>> using the correct bind statement on a dial-peer for OPTIONS reply, would >>>>>> be >>>>>> necessary. In which case, you would need to match an incoming call leg >>>>>> dial peer by the SIP Via header alone, and not, say for example, incoming >>>>>> called number. >>>>>> >>>>>> Example Pseudo Configuration: >>>>>> >>>>>> voice class sip uri 100 >>>>>> host ipv4:10.1.1.1 >>>>>> ! >>>>>> dial-peer voice 100 voip >>>>>> incoming uri via 100 >>>>>> bind media interface g0/1 >>>>>> bind control interface g0/1 >>>>>> ! >>>>>> >>>>>> On Tue, Oct 9, 2018 at 1:12 PM Maciej Bylica <mbgathe...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Thanks for prompt answer. >>>>>>> >>>>>>> No, i am not using CCP. >>>>>>> As i see OPTIONS ping does not match with any dialpeer >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/1024/ccsipInitPldCallingInfo: >>>>>>> non-numeric >>>>>>> calling number: *stringhere* >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/verbose/1024/sipSPIGetViaHostInURLFormat: >>>>>>> VIA >>>>>>> URL:sip:10.10.10.10:5060, Host:100.64.4.31 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/verbose/67584/sipSPIGetShrlPeer: Try match >>>>>>> incoming dialpeer for Calling number: : *stringhere* >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Error/sipSPIGetPeerByCalledPartyId: >>>>>>> >>>>>>> input arg error >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/critical/10240/sipSPIGetCallConfig: No >>>>>>> match >>>>>>> found for P-Called-Party-ID >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Error/sipSPIUpdateCallInfo: >>>>>>> >>>>>>> input argument error >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/verbose/1024/sipSPIGetCallConfig: >>>>>>> Precondition >>>>>>> tag absent in Require/Supported header >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/verbose/2048/sipSPIGetCallConfig: Media >>>>>>> Antitrombone disabled >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/8192/sipSPISetMediaFlowMode: Storing >>>>>>> the >>>>>>> configured mode as FLOW-THROUGH >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/2304/sipSPISetMediaFlowMode: xcoder >>>>>>> high-density disabled >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/8192/sipSPISetMediaFlowMode: Flow Mode >>>>>>> set to FLOW_THROUGH >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: Non dial >>>>>>> peer >>>>>>> leg - using RTP Supported Codecs >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 18 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 0 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 8 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 9 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 4 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 2 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 15 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/10240/sipSPIGetCallConfig: RTP >>>>>>> Preferred >>>>>>> Codecs supported by GW 255 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/critical/32768/ccsip_ipip_media_forking_update_preferred_codec: >>>>>>> MF: Not a Forked SIP leg.. >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/verbose/1/ccsip_set_srtp_config: No Srtp >>>>>>> configure for this leg. >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/verbose/12288/sipSPIGetModemInfoPerCall: >>>>>>> peer_callID=0 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Error/ccsip_ipip_media_forking_anchor_leg_config: >>>>>>> >>>>>>> >>>>>>> MF: *Dial-peer is absent*.. >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/36864/sipSPIMFChangeState: MF: Prev >>>>>>> state >>>>>>> = 0 & New state = -1 >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Info/info/32768/ccsip_ipip_media_forking_anchor_leg_reset: >>>>>>> MF: Anchor leg config reset done... >>>>>>> >>>>>>> Oct 9 17:50:04.068: >>>>>>> //3652/95FFAA748E45/SIP/Error/ccsip_ipip_media_forking_intra_frame_request_config: >>>>>>> >>>>>>> >>>>>>> MF:video profile Dial-peer is absent.. >>>>>>> >>>>>>> >>>>>>> OPTIONS looks like following: >>>>>>> >>>>>>> OPTIONS sip:domain.name.here:5060 SIP/2.0 >>>>>>> >>>>>>> From: <sip:*stringhere*@domain.name.here>;tag=4a6000292f6a >>>>>>> >>>>>>> To: <sip:*stringhere*@domain.name.here> >>>>>>> >>>>>>> >>>>>>> >>>>>>> I do not have any script in use there, the configuration in pretty >>>>>>> basic. >>>>>>> What i have found is that second OPTIONS (the one that is >>>>>>> left/dropped without OK) also generates following output: >>>>>>> >>>>>>> Oct 9 17:50:38.070: >>>>>>> //-1/xxxxxxxxxxxx/SIP/Info/verbose/4096/ccsip_new_msg_preprocessor: >>>>>>> Checking Invite Dialog >>>>>>> >>>>>>> Oct 9 17:50:38.070: >>>>>>> //3653/9862338A8E46/SIP/Info/verbose/4096/sipSPIFindCcbUASReqTable: >>>>>>> *****CCB found in UAS Request table. ccb=0x2766B958 >>>>>>> >>>>>>> Oct 9 17:50:38.070: >>>>>>> //3653/9862338A8E46/SIP/Info/info/4096/sipSPICheckFromToRequest: Trying >>>>>>> with child CCB 0x0 index 0 curr_child 0 >>>>>>> >>>>>>> >>>>>>> Oct 9 17:50:38.070: >>>>>>> //3653/9862338A8E46/SIP/Error/sipSPICheckFromToRequest: >>>>>>> >>>>>>> >>>>>>> >>>>>>> Failed FROM/TO Request check - IGNORE IF HAIRPIN CALL >>>>>>> >>>>>>> old_from: <sip:*stringhere*@domain.name.here>;tag=4a6000292f6a >>>>>>> >>>>>>> old_to: <sip:*stringhere*@domain.name.here>;tag=D7E844-1438 >>>>>>> >>>>>>> new_from: <sip:*stringhere*@domain.name.here>;tag=6c7f09452671 >>>>>>> >>>>>>> new_to: <sip:*stringhere*@domain.name.here> >>>>>>> >>>>>>> .... >>>>>>> >>>>>>> Oct 9 17:50:04.068: //-1/xxxxxxxxxxxx/SIP/Error/httpish_msg_free: >>>>>>> >>>>>>> Freeing NULL pointer! >>>>>>> >>>>>>> Could you please point me where i can find some information how to >>>>>>> create such dial-peer for OPTIONS or give me a brief example of this >>>>>>> configuration please. >>>>>>> >>>>>>> Thanks >>>>>>> Maciej. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> wt., 9 paź 2018 o 16:39 Nick Barnett <nicksbarn...@gmail.com> >>>>>>> napisał(a): >>>>>>> >>>>>>>> Are you using Customer Call Back? Which dial peer is the options >>>>>>>> ping hitting? Does that dial peer have the CCB script on it? If so... >>>>>>>> maybe >>>>>>>> make another dial peer for options pings that does not have the script >>>>>>>> enabled. This is just a hunch... >>>>>>>> >>>>>>>> On Tue, Oct 9, 2018 at 6:50 AM Maciej Bylica <mbgathe...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Hi >>>>>>>>> >>>>>>>>> I have really strange problem with SIP OPTIONS pings. >>>>>>>>> The Cisco i have (CUBE 3945 ios Version 15.3(3)M5) responds only >>>>>>>>> to the first OPTIONS packet that is received from the endpoint. >>>>>>>>> The rest of OPTIONs are dropped with following debug output: >>>>>>>>> >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694907: Oct 9 10:55:58.194: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP >>>>>>>>> SPI : >>>>>>>>> SIPSPI_EV_CC_OPTIONS_RESP >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694908: Oct 9 10:55:58.194: >>>>>>>>> //148025/BCB3C79A92C0/SIP/Info/info/4096/sact_idle_new_message_options: >>>>>>>>> ccsip_api_options_ind returned: SIP_SUCCESS >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694909: Oct 9 10:55:58.194: >>>>>>>>> //148025/BCB3C79A92C0/SIP/State/sipSPIChangeState: 0x258D7210 : State >>>>>>>>> change from (STATE_IDLE, SUBSTATE_NONE) to (SIP_STATE_OPTIONS_WAIT, >>>>>>>>> SUBSTATE_NONE) >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694910: Oct 9 10:55:58.194: >>>>>>>>> //148025/BCB3C79A92C0/SIP/Error/sipSPIUaddCcbToTable: >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694911: *Could not add ccb to table*. >>>>>>>>> ccb=0x258D7210 >>>>>>>>> key=c3c4f5582a4bfa1ff4b7e741c3cb6c6822f738b4cd7e78633fc70f5441197d3 >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694912: Oct 9 10:55:58.194: >>>>>>>>> //148025/BCB3C79A92C0/SIP/Error/sact_idle_new_message_options: >>>>>>>>> Oct 9 12:52:06 10.10.10.10 8694913: *Resource failure, dropping >>>>>>>>> OPTIONS* >>>>>>>>> >>>>>>>>> The true is that Cisco receives quite significant amount of SIP >>>>>>>>> OPTIONs from the endpoint in short time, like 10 OPTIONS packeges >>>>>>>>> within >>>>>>>>> miliseconds. >>>>>>>>> The after-effect i want to achieve is a response for each incoming >>>>>>>>> OPTIONS >>>>>>>>> >>>>>>>>> Example of a successful response: >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625106: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP >>>>>>>>> SPI : >>>>>>>>> SIPSPI_EV_CC_OPTIONS_RESP >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625107: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Info/info/4096/sact_idle_new_message_options: >>>>>>>>> ccsip_api_options_ind returned: SIP_SUCCESS >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625108: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/State/sipSPIChangeState: 0x258B1110 : State >>>>>>>>> change from (STATE_IDLE, SUBSTATE_NONE) to (SIP_STATE_OPTIONS_WAIT, >>>>>>>>> SUBSTATE_NONE) >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625109: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Info/verbose/4096/sipSPIUaddCcbToTable: >>>>>>>>> Added to >>>>>>>>> table. ccb=0x258B1110 >>>>>>>>> key=c3c4f5582a4bfa1ff4b7e741c3cb6c6822f738b4cd7e78633fc70f5441197d3 >>>>>>>>> balance >>>>>>>>> 1 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625110: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Info/verbose/4096/sipSPIUaddccCallIdToTable: >>>>>>>>> Adding call id 23DA9 to table >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625111: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Info/info/4096/ccsip_process_sipspi_queue_event: >>>>>>>>> ccsip_spi_get_msg_type returned: 3 for event 38 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625112: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Info/info/1024/httpish_msg_create: created >>>>>>>>> msg=0x203FFDA4 with refCount = 1 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625113: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Info/info/4096/sipSPISendOptionsResponse: >>>>>>>>> Associated container=0x2673A528 to Options Response >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625114: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Info/verbose/8192/sipSPIAppHandleContainerBody: >>>>>>>>> sipSPIAppHandleContainerBody len 164 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625115: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Transport/sipSPITransportSendMessage: >>>>>>>>> msg=0x203FFDA4, addr=11.11.11.11, port=5060, sentBy_port=5060, >>>>>>>>> local_addr=, >>>>>>>>> is_req=0, transport=1, switch=0, callBack=0x4F48054 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625116: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Info/info/2048/sipSPIGetExtensionCfg: SIP >>>>>>>>> extension config:1, check sys cfg:1 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625117: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Transport/sipSPITransportSendMessage: >>>>>>>>> Proceedable >>>>>>>>> for sending msg immediately >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625118: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Transport/sipTransportLogicSendMsg: Trying >>>>>>>>> to >>>>>>>>> send resp=0x203FFDA4 to default port=5060 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625119: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: >>>>>>>>> connection required for raddr:11.11.11.11, rport:5060 with laddr: >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625120: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Transport/sipInstanceGetConnectionId: >>>>>>>>> Registering >>>>>>>>> gcb=0x258B1110 with connection=0x2426673C context list >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625121: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Transport/sipTransportLogicSendMsg: >>>>>>>>> Connection >>>>>>>>> obtained...sending msg=0x203FFDA4 >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625122: Oct 9 09:34:28.569: >>>>>>>>> //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting >>>>>>>>> send >>>>>>>>> for msg=0x203FFDA4, addr=11.11.11.11, port=5060, local_addr=, >>>>>>>>> connId=2 for >>>>>>>>> UDP >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625123: Oct 9 09:34:28.569: >>>>>>>>> //146857/5A42A0608E30/SIP/Msg/ccsipDisplayMsg: >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625124: Sent: >>>>>>>>> Oct 9 11:30:37 10.10.10.10 8625125: SIP/2.0 200 OK#015 >>>>>>>>> >>>>>>>>> Could someone help me with this? I really appreciate your advice. >>>>>>>>> >>>>>>>>> Maciej >>>>>>>>> _______________________________________________ >>>>>>>>> cisco-voip mailing list >>>>>>>>> cisco-voip@puck.nether.net >>>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>> cisco-voip mailing list >>>>>>> cisco-voip@puck.nether.net >>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>>>>> >>>>>>
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
