Depends on what you want to test exactly, and for what purpose, i.e. training, learning, deployment
Lots of options though - CUCM - Another CUBE - Internet based SIP trunks (probably the best option) – plenty of cheap ones, and some free In practice, you’ll find lots of little differences and bits and pieces of config needed between different versions of CUBE, and different ITSP’s.. So the best resources are checking to see if the provider has a recommended config or even a verified config with testing The best testing is when you get access to a trunk We usually have our trunks provisioned upfront with test ranges, so plenty of time to fully test and tweak Cisco even has some of these published Cheers, Tim From: cisco-voip <[email protected]> on behalf of naresh rathore <[email protected]> Date: Friday, 4 October 2019 at 10:54 am To: "[email protected]" <[email protected]> Subject: [cisco-voip] best software/device to simulate ITSP and test CUBE functionality hi what is the best software/device i can use to simulate ITSP and test CUBE configuration, my purpose is to change settings on ITSP software/device and check sip messages and make corresponding cube config changes for troubleshooting and testing purpose Regards Naray
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
