Running CUCM 12.5 and a 8851's and it works fine. Maybe try to create a new CSS / PT for your null translation pattern, and make sure its applied to the phone... It might also help if you create a new SIP Dial rule with a single line for the PLAR for testing...
------------------------------------------------------------------------------------------------------ Chase Mergenthal -----Original Message----- From: cisco-voip <[email protected]> On Behalf Of Myron Young Sent: Thursday, October 24, 2019 7:38 AM To: cisco-voip voyp list <[email protected]> Subject: [CAUTION! EXTERNAL] [cisco-voip] SIP Plar to 8841 phones ⚠ The sender was not validated and could be a phish. ⚠ Slow down, read carefully and look for signs that it may be a phish. Click the report phish button or forward this email to phishing@bestbuy. com if you think it's malicious. Hello, Has anyone ever gotten the plar to work for SIP 8841 phones? I’m setting it up now with one 6901 skinny phone and two 8841 sip phones on CUCM 9.1 but the 8841 phones don’t dial the 6901 phone. I’m able to get it working from skinny 6901 phone to 8841 phone no problem but can’t get it to work opposite way around. I have all the partitions, CSS, translation patterns and sip dial rules configured, but when i pick up handset of 8841 phone I just get dial tone instead of ring back from calling the 6901 phone. _______________________________________________ cisco-voip mailing list [email protected] https://urldefense.com/v3/__https://puck.nether.net/mailman/listinfo/cisco-voip__;!OtTxrmHEG2g!_Zb0FNjfCEMt_txtHYto8QtniJTFen-76SH0svdtH0XssnjQIuCVYiNPCv_OUdtuMi58Lw$ _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
