A couple of thoughts for you...
* Get the software release key for 12.x now (you'll be asked to enter it
during the upgrade in the GUI). You'll need to work with TAC > GLO for this if
(and I assume this would be your case) the existing 8.7 serial is active in
Cisco's licensing system. The caveat to trying to do this with Cisco's
self-service license re-host tool is that while the 8.7 serial is active, it
won't allow you to assign the new 12.x software release PAK to the serial
because the serial is already assigned to another software release key.
* Take a backup first, your only roll back option is to re-install 8.7
and restore the backup.
* Your VMware Hypervisor needs to be 6.0/5/7.
* If you have Hybrid Services configured, make sure the management
connector is up to date first.
* SSL Certificate validation changed a bit in 8.8+
* Verify proper forward / reverse DNS for all the relevant touch points
* Make sure the Expressway certificate trust is up-to-date with all the
current CUCM,CUC,IMP identity certificates (self-signed) or CA certificates
(public CA signed certificates).
* no duplicate certificates in the Expressway trusts
Beyond that, just pay attention to the caveats list in the upgrade doc for your
version of 12.5.x (12.5.4 is the latest I think).
Thanks,
Ryan
________________________________
From: cisco-voip <[email protected]> on behalf of Jonathan
Charles <[email protected]>
Sent: Friday, November 15, 2019 10:57 AM
To: [email protected] <[email protected]>
Subject: [cisco-voip] VCS Expressway upgrade, 8.7 to 12.5
Can we just upgrade directly or do we need to go to an intermediary version
first?
Also, any gotchas besides new certificates?
Jonathan
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
