Hello, The last time I had to record analog, I had to force the call out of the analog gateway to another analog gateway (basically) and capture the data in between. I used ZOOM CallREC to capture the recording. That said, with the new media forking available in the gateways, you might be able to hairpin that call through a VoIP dial peer to get it to fork. I've done that with a PRI before and sent the forked stream to MediaSense. Not ideal, but worked. I've attached that config for your reference.
Thanks, James On Thu, Dec 12, 2019 at 2:33 PM Pawlowski, Adam <[email protected]> wrote: > Hello all, > > I'm trying to find a solution that will support not only BiB call > recording for IP Phones and Jabber, of which there are many, but, also > analog lines. However, we're not looking to record them from a VG. These > lines are used as a backup during maintenance to the VoIP system, or when > the facility is isolated from the network or VoIP is otherwise down. We'd > like to record the audio from them and either spool it to be sent to the > recording server later, or, less ideally, the recording server would be a > physical server located at that site so that our network interruptions > aren't their network interruptions. > > I can find any number of solutions that will work for the BiB devices, > but, not this analog scenario. I've seen some options from Revcord and > HigherGround which sort of can accomplish this but are larger software > suites. > > Anyone aware of anything that can do this? > > Regards, > > > > Adam Pawlowski > > SUNYAB > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BE6K_Router ! boot-start-marker boot-end-marker ! aqm-register-fnf ! card type t1 0 0 logging buffered 51200 warnings ! no aaa new-model network-clock-participate wic 0 network-clock-select 3 T1 0/0/0 ! ! ! ! ip dhcp excluded-address 10.10.10.1 ! ip dhcp pool ccp-pool import all network 10.10.10.0 255.255.255.248 default-router 10.10.10.1 lease 0 2 ! ! ! ip domain name dsot.local ip name-server 192.168.221.154 ip cef no ipv6 cef multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-4ess ! ! ! ! voice service voip address-hiding mode border-element allow-connections sip to sip fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip ! ! ! ! voice translation-rule 1 rule 1 /\(.*\)/ /888\1/ ! voice translation-rule 2 rule 2 /888\(.*\)/ /\1/ ! voice translation-rule 3 rule 1 /3\(.*\)/ /\1/ ! ! voice translation-profile OutboundIntl translate called 3 ! voice translation-profile prefix translate called 1 ! voice translation-profile strip translate called 2 ! ! ! media profile recorder 10000 media-recording 20 ! media class 3 recorder profile 10000 ! license udi pid CISCO2901/K9 sn FJC1912A1VV hw-module pvdm 0/0 ! hw-module pvdm 0/1 ! ! ! redundancy ! ! controller T1 0/0/0 cablelength long 0db pri-group timeslots 1-24 description Linefromadtran ! ! ! ! ! interface Loopback0 ip address 1.1.1.1 255.255.255.255 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$ ip address 10.10.10.1 255.255.255.248 duplex auto speed auto ! interface GigabitEthernet0/1 description Trunk to POE switch no ip address duplex auto speed auto ! interface GigabitEthernet0/1.1 description Data VLAN sub-interface encapsulation dot1Q 1 native ip address 192.168.221.253 255.255.255.0 ! interface GigabitEthernet0/1.75 description BE6K Voice VLAN sub-interface encapsulation dot1Q 75 ip address 192.168.122.254 255.255.255.0 ! interface GigabitEthernet0/1.100 description uc500 voice vlan 100 encapsulation dot1Q 100 ip address 192.168.222.254 255.255.255.0 ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice no cdp enable ! ip forward-protocol nd ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ip route 0.0.0.0 0.0.0.0 192.168.221.254 ip route 192.168.221.70 255.255.255.255 192.168.221.254 ip route 192.168.221.117 255.255.255.255 192.168.221.254 ip route 192.168.221.154 255.255.255.255 192.168.221.254 ! ! ! access-list 23 permit 10.10.10.0 0.0.0.7 ! control-plane ! ! voice-port 0/0/0:23 ! ! ! ! ! mgcp mgcp call-agent 192.168.122.201 2427 service-type mgcp version 0.1 mgcp rtp unreachable timeout 1000 action notify mgcp modem passthrough voip mode nse mgcp package-capability rtp-package mgcp package-capability sst-package mgcp package-capability pre-package no mgcp package-capability res-package no mgcp timer receive-rtcp mgcp sdp simple mgcp fax t38 inhibit mgcp behavior rsip-range tgcp-only mgcp behavior comedia-role none mgcp behavior comedia-check-media-src disable mgcp behavior comedia-sdp-force disable ! mgcp profile default ! ! ccm-manager music-on-hold ! ccm-manager mgcp no ccm-manager fax protocol cisco ccm-manager config server 192.168.122.201 ccm-manager config ! dial-peer voice 999000 pots service mgcpapp ! dial-peer voice 20 voip description Dial-peer pointing to the recording server destination-pattern 99999 session protocol sipv2 session target ipv4:192.168.122.207 session transport tcp voice-class sip options-keepalive no vad ! dial-peer voice 1 pots translation-profile incoming prefix incoming called-number . direct-inward-dial port 0/0/0:23 ! dial-peer voice 2 voip description To loop incoming PSTN calls back to itself destination-pattern 888. session protocol sipv2 session target ipv4:1.1.1.1 dtmf-relay rtp-nte h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 3 voip description Incoming DP for the looped call translation-profile incoming strip session protocol sipv2 incoming called-number 888. dtmf-relay rtp-nte h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 4 voip description outgoing DP for the looped call to PBX destination-pattern [1245678]... session protocol sipv2 session target ipv4:192.168.122.201 media-class 3 dtmf-relay rtp-nte h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 5 voip description Incoming DP for the outgoing PSTN calls translation-profile incoming prefix session protocol sipv2 incoming called-number 3. dtmf-relay rtp-nte h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 6 voip description To loop outgoing PSTN calls destination-pattern 8883. session protocol sipv2 session target ipv4:1.1.1.1 media-class 3 dtmf-relay rtp-nte h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 7 voip description Incoming DP for the looped call translation-profile incoming strip session protocol sipv2 incoming called-number 8883. dtmf-relay rtp-nte h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 8 pots destination-pattern 3[2-9]......$ port 0/0/0:23 forward-digits 7 ! dial-peer voice 9 pots destination-pattern 3[2-9]..[2-9]......$ port 0/0/0:23 forward-digits 10 ! dial-peer voice 10 pots destination-pattern 3[2-9]11$ port 0/0/0:23 forward-digits 3 ! dial-peer voice 11 pots destination-pattern 31[2-9]..[2-9]...... port 0/0/0:23 forward-digits 11 ! dial-peer voice 12 pots destination-pattern 3011T port 0/0/0:23 prefix 011011 ! ! !
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
