Just as an aside... this uses up a “video endpoint” peg count. So, at most, 200 
attendants this way.

Sent from my iPhone

On Feb 20, 2020, at 7:36 AM, Pawlowski, Adam 
<aj...@buffalo.edu<mailto:aj...@buffalo.edu>> wrote:

I set up a dial pattern for this in our UCM, to match the dialing prefix set in 
Webex teams, which currently goes to our site.

It’s not that great from audio only devices because the meet IVR just answers 
with “enter your meeting number” and then is silent.

However – you can start a meeting this way very easily as you join as a video 
device as far as Webex is concerned.

From: cisco-voip 
<cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Brian Meade
Sent: Wednesday, February 19, 2020 9:29 PM
To: JASON BURWELL 
<jason.burw...@foundersfcu.com<mailto:jason.burw...@foundersfcu.com>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] Join Webex Button on TOuch 10

You can dial any 9-digit meeting number now like 
123456...@webex.com<mailto:123456...@webex.com>.  Webex changed to make these 
non-site specific.  So it's easy to make an Extron/Crestron interface to enter 
a 9-digit meeting number than have it just add @webex.com<http://webex.com> and 
dial.

The other thing you can do is just have a button for 
m...@webex.com<mailto:m...@webex.com> which prompts you to enter the 9-digit 
meeting number via DTMF.

On Tue, Feb 18, 2020 at 4:12 PM JASON BURWELL via cisco-voip 
<cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> wrote:
I noticed with CE9.10 they have now added a “Join Webex” button that appears on 
the Touch 10 home screen that allows direct calling to a webex meeting without 
dialing the entire URI. This is a great feature but now I’m trying to figure 
out if anyone is having luck integrating this Quick connect to webex meeting 
feature in to room systems that are Crestron controlled and do not have a Touch 
10 present. Sure would be nice to be able to be able to have this functionality 
from the Crestron control as well. My A/V vendor says they “are working on it” 
so it could be a while. Anyone had luck with this?

Thanks Jason
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to