Each registration over MRA will show the expressway’s IP address for the device IP, therefore an RTMT device search by IP address of the expressway(s) can tell you how many registrations are coming from each expressway to a certain CUCM cluster.
After logging into RTMT go to Voice/Video > Device > Device/Search > Open Device Search > Phone. Leave everything default and click next until you get to the “Search with Name” screen. Choose IP address for the search criteria, and put in the expressway IP address (10.1.1.1) or IP addresses (10.1.1.10*) in there. You will get a list of phones registered from the IP address of the expressway (over MRA). If you look at the bottom of the window below “Device Monitor” you will see “X Devices match this search criteria” to get the total count. Joe On Mar 16, 2020, at 7:02 AM, Pawlowski, Adam <[email protected]<mailto:[email protected]>> wrote: I don’t have a “view provisioning sessions” link on any of my Expressway From: cisco-voip <[email protected]<mailto:[email protected]>> On Behalf Of Brian Meade Sent: Thursday, March 12, 2020 2:01 PM To: SK <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]> Subject: Re: [cisco-voip] Expressway MRA registrations Status->Unified Communications and can look at View Provisioning Sessions link. On Tue, Mar 10, 2020 at 11:33 PM SK <[email protected]<mailto:[email protected]>> wrote: Hello, How can I find how many current registrations are active on the expressway for MRA? Thank you . _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
