Hi Everyone. I was googling the answer for MRA failover and found this maillist. Got a similar setup as Jonathan's environment. Having a pair of expressway C&E in primary DC, and planning to setup another pair of expressway C&E in the DR site. All MRA should go via primary DC, only use DR site when primary is down.
Can I achieve this with different priorities in SRV? Anyone tested or make it working? Best Regards, Guan >>>* On Jan 28, 2020, at 8:49 PM, Jonathan Charles <jonvoip at gmail.com >>><https://puck.nether.net/mailman/listinfo/cisco-voip>> wrote: *>>>>>>* We have two pairs of Expressway clusters (C/E) at two different *>>>* locations (primary and DR)... *>>>>>>* The cluster is up, however, we want to make sure that we are in *>>>* Active/Standby. *>>>>>>* Currently, we have one of our SRV records for collab-edge set at 5 (the *>>>* backup is at 10) with the same weight. *>>>>>>* The clustering guide says we should set the priority and weight on both *>>>* SRV records the same, which will cause half of the registrations to go to *>>>* the DR site. It is far away and has less capability. *>>>>>>* How do we: *>>>>>>* 1 - Make sure the primary site handles all MRA registrations and the DR *>>>* site is only used when the primary is down. *>>>* 2 = Make sure failover occurs automatically... currently Jabber users *>>>* have to log out and back in to connect to the DR site. *>>>
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
