It’s 98% on active partion, 94% on inactive one, on both publisher and subscriber.
Matthew Huff | Director of Technical Operations | OTA Management LLC Office: 914-460-4039 mh...@ox.com<mailto:mh...@ox.com> | www.ox.com<http://www.ox.com> ........................................................................................................................................... From: Tim Smith <tim.sm...@enject.com.au> Sent: Wednesday, September 29, 2021 8:05 AM To: Matthew Huff <mh...@ox.com> Cc: James Buchanan <james.buchan...@gmail.com>; Cisco VoIP Group <cisco-voip@puck.nether.net> Subject: Re: [cisco-voip] Low space on partitions in CUCM I've had these alerts pop up on fresh install during a PCD migration (new VM's) (it was 12.5 from memory) I spent a bit of time back and forth with TAC and checking with other TAC engineers etc. I think the outcome was basically that it was the standard setup of the Active Partition, and it isn't really an issue, except that you will get those alerts (and you can adjust the thresholds) But it's only a partition inside, and basically you have other space available. What does your show diskusage look like? On Wed, 29 Sept 2021 at 21:56, Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> wrote: I deleted the old firmware files and we don’t use any MOH sources other than the built in one. The copp file is for cleaning up the common partition, but I ran it anyway. The active parttion still shows 98% used. I’m afraid TAC is correct, the older ova file that we used for 11.5 created too small of an active partition for 14, and the only solution is to do a complete rebuild. Matthew Huff | Director of Technical Operations | OTA Management LLC Office: 914-460-4039 mh...@ox.com<mailto:mh...@ox.com> | www.ox.com<http://www.ox.com> ........................................................................................................................................... From: James Buchanan <james.buchan...@gmail.com<mailto:james.buchan...@gmail.com>> Sent: Wednesday, September 29, 2021 7:37 AM To: Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> Cc: Cisco VoIP Group <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: Re: [cisco-voip] Low space on partitions in CUCM Oh right... 1. Delete old firmware files. 2. Delete unused MOH sources. 3. Use the free space .cop file. On Wed, Sep 29, 2021 at 12:32 PM Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> wrote: The alert that is being triggered isn’t the LogPartition space, it’s the active partition space, which I believe is a separate area. Any suggestion on how to cleanup space on the active parttion? Matthew Huff | Director of Technical Operations | OTA Management LLC Office: 914-460-4039 mh...@ox.com<mailto:mh...@ox.com> | www.ox.com<http://www.ox.com> ........................................................................................................................................... From: James Buchanan <james.buchan...@gmail.com<mailto:james.buchan...@gmail.com>> Sent: Wednesday, September 29, 2021 6:39 AM To: Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> Cc: Cisco VoIP Group <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: Re: [cisco-voip] Low space on partitions in CUCM Hi Matthew, I totally agree but I think you'll be OK. I've done it when at a similar level and it's helped. Another thing you might do is to download all the log files and set them to delete when you download them. That might get you at a safer level. Kind Regards, James On Wed, Sep 29, 2021 at 11:36 AM Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> wrote: If it was like 92%, fixing the log threshold would make me feel less nervous. At 98%, I’m more concerned. Maybe I shouldn’t be? Matthew Huff | Director of Technical Operations | OTA Management LLC Office: 914-460-4039 mh...@ox.com<mailto:mh...@ox.com> | www.ox.com<http://www.ox.com> ........................................................................................................................................... From: James Buchanan <james.buchan...@gmail.com<mailto:james.buchan...@gmail.com>> Sent: Wednesday, September 29, 2021 6:33 AM To: Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> Cc: Cisco VoIP Group <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: Re: [cisco-voip] Low space on partitions in CUCM Hi Matthew, Have you tried adjusting the log file thresholds in RTMT? See https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200581-Procedure-to-Adjust-WaterMark-in-RTMT-of.html for more details. Thanks, James On Wed, Sep 29, 2021 at 11:28 AM Matthew Huff <mh...@ox.com<mailto:mh...@ox.com>> wrote: After upgrading from 11.5 to 14, I’m at 98% on publisher/subscriber on the active partition. Cisco TACs only suggestion is to redeploy from scratch from 14 ova. Given the issues with certs, trusts, licensing, etc, I’m loathe to do that. Anyone have any suggestions? Matthew Huff | Director of Technical Operations | OTA Management LLC Office: 914-460-4039 mh...@ox.com<mailto:mh...@ox.com> | www.ox.com<http://www.ox.com> ........................................................................................................................................... _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip -- Tim Smith - Technical Consultant @ Enject P +61 2 9423 1011 | E tim.sm...@enject.com.au<mailto:tim.sm...@enject.com.au>
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
