How did this work out? Sent from my iPhone
On Jan 3, 2022, at 3:52 PM, Mathew Miller <[email protected]> wrote: CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to [email protected] It was failing the upgrade, so I went to try the tool again. It seems I had an expired ip-sec cert which was causing the problem. I regenerated that and a couple of magic reboots and it seems to be working now. On Jan 3, 2022, at 11:46 AM, Matthew Loraditch <[email protected]> wrote: It won’t upgrade or you are running the check and it’s failing? It’s been a while since I’ve done one of these myself, but if it’s just the check tool, try to just run the actual upgrade. I believe the tool is intended to be run on all servers before you start anything. From: cisco-voip <[email protected]> On Behalf Of Mathew Miller Sent: Monday, January 3, 2022 1:54 PM To: James Buchanan <[email protected]> Cc: Cisco VOIP <[email protected]> Subject: Re: [cisco-voip] CUC 10.5 to 14 ER Not working [EXTERNAL] The subscriber will not upgrade. I'm getting a failure on the pre-upgrade check for the subscriber. 1.1 FAIL Network status (NTP, DNS, Cluster Connectivity) validate_network : Error, intra-cluster communication is broken, unable to connect to X.X.X.X On Mon, Jan 3, 2022 at 10:22 AM James Buchanan <[email protected]<mailto:[email protected]>> wrote: Hello, Have you upgraded the subscriber? That needs to be done before database replication will work. Thanks? James On 3 Jan 2022, at 18:15, Mathew Miller <[email protected]<mailto:[email protected]>> wrote: Hello, Working on an upgrade from CUC 10.5 to 14. Publisher finished and didn't seem to have any issues. After running the post upgrade check COP file it fails 1.1 FAIL Cluster Database Status (Node authentication and replication status) When I do a utils dbreplication status it shows Enterprise Replication not active (62) command failed -- unable to connect to server specified (5) utils dbreplication runtimestate it says Cluster Detailed View from CUC-01 (2 Servers): PING DB/RPC/ REPL. Replication REPLICATION SETUP SERVER-NAME IP ADDRESS (msec) DbMon? QUEUE Group ID (RTMT) & Details ----------- ---------- ------ ------- ----- ----------- ------------------ CUC-01 X.X.X.X 0.018 Y/Y/Y -- (-) (-) Replication Not Setup CUC-02 X.X.X.X 0.125 Y/Y/Y -- (-) (-) DB-diff I've attempted to reset replication this way. https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/116942-technote-uc-00.html It doesn't seem to be working for me. Replication status always just says not setup Any ideas? _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
