Here is the pinouts for T1 crossover cable that I am using in my lab...
T-1 crossover:
1 4
2 5
3 3
4 1
5 2
6 6
7 7
8 8
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sasa Milic
Sent: Tuesday, May 09, 2000 1:57 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Alternative Back to Back connection
>
> could one connect a pair of routers back to back using csu/dsu's?
> Basically from router A, s0 connect via v.35 to a csu/dsu
> and from router b, s0 connect via v.35 to a csu/dsu
> then connect the csu/dsu's back to back somehow?
Yes, it is possible, no problems. Just config one csu/dsu to
generate clock (clock internal) and the other to sync to line
clock and make crossed cable between csu/dsu's. In case of E1 line,
pins on RJ-45 are 1,2 and 4,5; sorry, don't know about T1.
Sasa
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
