You need to drop the speed of Hyperterminal connection to 2400 to get the
chance to take the <CTRL><SHIFT><^>
I had same problem and I was able to get to rommon mode.
Goodluck
Rayza manesh
>From: "Mark Harris" <[EMAIL PROTECTED]>
>Reply-To: "Mark Harris" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Wake up !
>Date: Thu, 4 May 2000 08:09:05 -0400
>
>Mornin' Alex - Not absolutely sure, but Try <CTRL><SHIFT><^> shortly after
>a
>power on. Hope that gets you there, and if I am wrong others I am sure
>will
>point you in the right direction.
>
>Mark
>
>"alex campbell" <[EMAIL PROTECTED]> wrote in message
>news:[EMAIL PROTECTED]...
> > hello people
> >
> > just have a cisco 25** router. Connected via Hyperterminal in Windows
>98,
> > all settings seem correct as they work with other routers.
> > It tells me that no valid image can be found in flash. BUT I cant seem
>to
> > get it to boot in rommon mode. It wont let me hit BREAK or CTRL-BREAK
> > etc...i can see an error message and even a rommon prompt...but i cant
>type
> > anything.
> > config works for another 2500
> >
> >
> >
> > any help much appreciated
> >
> > ________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
> > ___________________________________
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > ---
>
>
>___________________________________
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Posting Guidelines: http://www.groupstudy.com/list/guide.html
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
