source should be the host and destination is any
this is because the access-group for ethernet port is in
means that the source is coming from the pc segment as source
access-list 101 permit tcp host 95.0.8.52 any eq telnet
cheers
To: [EMAIL PROTECTED]
cc:
From: [EMAIL PROTECTED] @ MBEXT
Date: 09-05-2000 09:39:31 PM MST
Subject: Lock-and-Key
I have a problem getting this to work correctly. My workstation ip address
is 95.0.8.52 and the ethernet address of the router I am telnetting too is
95.0.8.99.
interface ethernet 0
ip address 95.0.8.99 255.255.0.0
ip access-group 101 in
access-list 101 permit tcp any host 95.0.8.52 eq telnet
access-list 101 dynamic mytestlist timeout 120 permit ip any any
line vty 0
login local
autocommand access-enable timeout 5
Where am I going wrong? This configuration was taken directly from Cisco's
CC0. Thanks for your help.
Zack-CCIE Candidate
CCIE IN Y2G
_______________________________________________________
Get 100% FREE Internet Access powered by Excite
Visit http://freelane.excite.com/freeisp
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
