Show version will give you the answer
-----Original Message-----
From: Ralf-Peter M�ller [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 16, 2000 4:24 AM
To: [EMAIL PROTECTED]
Subject: Re: Serial numbers for routers
Hi,
try "show version" and/or "show diag"
cu
Nodir Nazarov wrote:
> Hello,
>
> is there any way to get serial numbers of cisco routers
and modules for
> these routers using command line ?
>
> Thanks,
> Nodir
>
> ___________________________________
> UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
http://www.groupstudy.com
Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
Visit our Website : http://www.traveland.com.au
Disclaimer - This message and any attachments are confidential and may contain
privileged information intended only for the use of the addressee named above. If you
are not the intended recipient of this message you are hereby notified that any use,
dissemination, distribution or reproduction of this message is prohibited. If you have
received this message in error please notify Traveland Pty Ltd immediately by return
email. Any views expressed in this message are those of the individual sender and may
not necessarily reflect the views of Traveland Pty Ltd.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
