Magnus,
for Local Director. the only SNMP commands that are listed for
management are
snmp-server contact
snmp-server location
snmp-server host
snamp enable traps.
the snmp community string default to public and can't be changed.
and a new version of MIBs must be installed for version 3.1
I have a list of the MIBs if you want them
>From: "Thorne, Magnus" <[EMAIL PROTECTED]>
>Reply-To: "Thorne, Magnus" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Local Directors
>Date: Mon, 15 May 2000 08:13:36 -0700
>
>Greetings,
>
>I'm interested in making a Perl script that will shut down farms on a
Cisco
>Local Director. I've done this before using SNMP on a Radware WSD.
>However, I'm not sure where to find the MIBs for a Local Director. I
>haven't found a way to configure a LD with a community string. Is this
even
>possible?
>
>thanx,
>-Magnus
>
>--------------------------------------------------------
>Magnus Thorne
>eVoice, Inc.
>1394 Williow Road
>Menlo Park, CA 94025
>Direct: 650.330.3974
>Main: 650.330.3700
>Fax: 650.330.3901
>--------------------------------------------------------
>eVoice. The best voicemail you can buy is free.
>Sign up at www.evoice.com or call 1.800.GET.EVOICE
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
