you have to use edge router at the two offices and route the traffic.
otherwise you may end up with chocking your wan link.
across the wan link switching is not a good practice unless otherwise you
are using MPLS or tag switching.
regards
jaison
> -----Original Message-----
> From: Kevin Zsenak [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, May 17, 2000 8:10 AM
> To: [EMAIL PROTECTED]
> Subject: Routing or Bridging?
>
> Hello group,
>
> I am looking for an opinion on whether to use routing
> or bridging in this situation.
>
> Two offices connected via 128k Frame Relay using only
> TCP/IP protocol. 30 users in one office 10 in the
> other. There are only servers in the first office.
> Servers are Win NT. Workstations are mostly Win 95
> with some NT.
>
> Would you use routing or bridging to connect them?
> With a bridge they could all be on the same subnet but
> wouldn't that cause a lot of broadcast traffic on the
> WAN?
>
> Thanks,
> Kevin
> Newly Minted CCNA
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Send instant messages & get email alerts with Yahoo! Messenger.
> http://im.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
