Yes.
On the major atm interface on r1, use the 'lane config
fixed-config-atm-address' for the LECS. This will force the
LECS to advertise the well-known LECS address, which the
LANE Clients already know how to use. This requires no
special configuration commands on the ls1010.
HTH,
Scott
"Sakandar, Basir" wrote:
>
> I want to make r1 the LECS, but I don't want to put the LECS address on the
> ATM switch, can r2 still join the elan?
>
> For example,
>
> r1---atm----r2
>
> Basir Ahmad Sakandar
> Network Design and Engineering
> Ph:310-332-3691
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
>> Scott F. Robohn, CCSI #20826, CCNP/CCDA.........703-623-3752 <<
>> Chesapeake Network Solutions.............mailto:[EMAIL PROTECTED] <<
>> mentor:technologies................mailto:[EMAIL PROTECTED] <<
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
