Justin Vo <[EMAIL PROTECTED]> wrote in message news:... > Hi, > > I managed to capture the log when my frame relay connection bouncing but yet > I'm unable to interpret this information. Can someone help to determine if > it's my router or my telco that's causing the problem. > > My router is Cisco 2501 with 8 MB flash and 16 MB DRAM. Basic frame relay > connection with basic configuration and static routing only. My captured log > is in the attached file. > > Frame information: > > interface Serial1 > description Optus frame service 22LT-02RO-MS701-AL001 > no ip address > encapsulation frame-relay IETF > frame-relay lmi-type q933a > ! > interface Serial1.1 point-to-point > description Connection to Chester Hill on 203.2.131.153 > ip address 203.2.131.154 255.255.255.252 > no cdp enable > frame-relay interface-dlci 29 > ! > interface Serial1.2 point-to-point > description Connection to Mulgrave on 203.2.131.157 > ip address 203.2.131.158 255.255.255.252 > no cdp enable > frame-relay interface-dlci 23 > ! > interface Serial1.3 point-to-point > ... > > > Much help appreciated > Justin Vo > [EMAIL PROTECTED] > > ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
