(Per your mail below)
Looks like you're on a box that doesn't support XNS,
which will probably be absolutely fine so far as
you're concerned. I /think/ this is Enterprise, btw.
c2610#conf t
Enter configuration commands, one per line. End with CNTL/Z.
c2610(config)#access-list ?
<1-99> IP standard access list
<100-199> IP extended access list
<1000-1099> IPX SAP access list
<1100-1199> Extended 48-bit MAC address access list
<1200-1299> IPX summary address access list
<200-299> Protocol type-code access list
<300-399> DECnet access list
<400-499> XNS standard access list
<500-599> XNS extended access list
<600-699> Appletalk access list
<700-799> 48-bit MAC address access list
<800-899> IPX standard access list
<900-999> IPX extended access list
HTH,
Tone
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> I was just finalizing my cram session when I came
> accross something that I hadn't noticed before. It's not very
> important and don't think it will come up on the test but I'm
> simply asking out of curiosity. The access list ranges are as follows:
>
> 1-99 = IP Standard
> 100-199 = IP Extended
> 200-299 = Protocol type-code
> 300-399 = DECnet
> 600-699 = Appletalk
> 700-799 = 48 bit MAC
> 800-899 = IPX standard
> 900-999 = IPX extended
> 1000-1099 = IPX SAP
> 1100-1199 = Extended 48 bit MAC
> 1200-1299 = IPX Summary address
>
> Now my question is quite simple...What happened to the number
> range of 400-599??? Are these used for something else that we
> don't need to know? Why aren't they in the book? And why
> don't they even address why they're not in the book with an
> explanation? Any comments would be appreciated. Thanks in
> advance for the help. ;)
> ~Mark Z.~
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
