Search the archives - you will find more info!
You can also see a list of error messages at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/sem/ems4t6
.htm
Good luck!
Scott Chapin CCNA
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> E. Carolina Arias S.
> Sent: Wednesday, May 24, 2000 11:00 AM
> To: Francis Lee
> Cc: [EMAIL PROTECTED]
> Subject: Re: [SYS-4-CONFIG_NEWER] question - please help
>
>
> I have seen that msg. since I started working with IOS 11.2.
> However, I have
> never had any problem with my configs.
>
> Francis Lee wrote:
>
> > Hi -
> >
> > I recently upgraded a Cisco 2501 router and loaded IOS 12.0(9).
> But when I
> > reload the router, I start seeing the following error message:
> >
> > ----------- Begin Log --------------
> > System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC
> RELEASE SOFTWARE
> > (fc1)
> > Copyright (c) 1986-1998 by cisco Systems
> > 2500 processor with 16384 Kbytes of main memory
> >
> > %SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not
> be correctly
> > under
> > stood.
> > F3: 9025820+289128+541956 at 0x3000060
> >
> > Restricted Rights Legend
> >
> > Use, duplication, or disclosure by the Government is
> > subject to restrictions as set forth in subparagraph
> > (c) of the Commercial Computer Software - Restricted
> > Rights clause at FAR sec. 52.227-19 and subparagraph
> > (c) (1) (ii) of the Rights in Technical Data and Computer
> > Software clause at DFARS sec. 252.227-7013.
> >
> > cisco Systems, Inc.
> > 170 West Tasman Drive
> > San Jose, California 95134-1706
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) 2500 Software (C2500-DOS-L), Version 12.0(9), RELEASE SOFTWARE
> > (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Mon 24-Jan-00 23:53 by bettyl
> > Image text-base: 0x0304A97C, data-base: 0x00001000
> >
> > ------------- End Log ---------------
> >
> > According to "Cisco IOS Software System Error Messages" this
> means that "the
> > configuration saved in memory was written by a newer software
> release" and
> > suggests that I "examine all the messages printed while the router was
> > booting".
> >
> > But the configuration command I put in are quite standard
> (actually I tftp'd
> > in from a backup file which is done under IOS 9.14). Judging
> from the place
> > where the error message popped up, can anyone shed some light if it
> > indicates a config error or something else?
> >
> > Thanks!!
> >
> > -francis
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> --
> E. Carolina Arias Serna
> Consorcio Red Uno
> Ingenierķa Datos
> Sector Servicios
> [EMAIL PROTECTED]
> 56244400 E4828
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
