"show int s0" or whatever interface you want to monitor.
There are two lines that say something similar to:
5 minute input rate 216000 bits/sec, 27 packets/sec
5 minute output rate 45000 bits/sec, 24 packets/sec
There's your 5 minute snapshot.
Francis Arigo, MCSE, CCNA
System Administrator
Classroom Connect
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 24, 2000 5:48 PM
To: [EMAIL PROTECTED]
Subject: Calculating bandwidth utilization
Hey,
Where can I find information on calculating the utilization on an
interface. Since I dont have any network management tools to use I want to
try to figure it out manually (if possible). Also are their any show
commands that show CPU and Memory resource utilization?
Thanks,
Pete
Remove the nospam from e-mail address.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
