I have 2 direct connections to a site with T-1s. I have a pair of
routers at each end (duh) and am running HSRP on each end...
r1 r2
s0 ----T1----s0
r3 r4
s0-----T1-------s0
r1 and r2 are the routers on our end. They use HSRP to advertise one IP
address on our Lan (each routers e0). The same goes for the r2 and r4
routers (their e0 ints advertise an HSRP ip address). Obviously, since
one router is standby and the other is active, we are only using one T1
at a time.
I would like to load balance the pair and use all our available
bandwidth, but at the same time have redundancy.
Blake
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
