Farook,
look at where it says " (MSFC Software (C6MSFC-JS-M), Version 12.0(7)XE1)
from this it shows that it is ("c6 for cat6000 ")
where in the "sh ver" do you read what type it is?
Try to use "sh ver" on the router and check the image. the following output
sh
cat6000 family. Hope that helps
>sh ver
Cisco Internetwork Operating System Software
IOS (tm) MSFC Software (C6MSFC-JS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT
RELEA
SE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Thu 03-Feb-00 23:33 by lstringr
Image text-base: 0x60008900, data-base: 0x610F4000
ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE
BOOTFLASH: MSFC Software (C6MSFC-BOOT-M), Version 12.0(7)XE1, EARLY
DEPLOYMENT
R
ELEASE SOFTWARE (fc1)
Can some please inform me, what command tells me what kind a router or
switch i am telnetting to. I have to telnet into about a hundred routers and
do an inventory of cards, i dont know how to tell what series router it
is.thanks in advance.
Farooq Ali
Network Engineer
Global Network Operations
212.625.7193
[EMAIL PROTECTED] <mailto:fali@globix
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
