Hi
I had manage to configure the DDR profile to make connection out. Later I
was changing the dialer profile to use dialer map command instead of dialer
string command. I got this error message from debugging and it never dial
out. What's wrong ? I had the dialing number in the dialer map.
Thanks
Koon.
CCNP
Note : please reply to my hotmail ( [EMAIL PROTECTED]) I am currently
outside my office have no access to my email. Thanks a lot.
Error Message from Debug Dialer
--------------------------------
16:01:22: BR0 DDR: Dialing cause ip (s=10.10.10.7, d=10.10.11.5)
16:01:22: BR0 DDR: No dialer string, dialing cannot occur
16:01:24: BR0 DDR: rotor dialout [priority]
16:01:24: BR0 DDR: Dialing cause ip (s=10.10.10.7, d=10.10.11.5)
16:01:24: BR0 DDR: No dialer string, dialing cannot occur
16:01:25: BR0 DDR: rotor dialout [priority]
_____________
My Config
----------
interface Dialer0
description xxxxx
ip address 10.10.11.4 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer idle-timeout 60
dialer map ip 10.10.11.3 name grik 7931107
dialer-group 1
no cdp enable
ppp authentication chap
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
