Dear all,
I've configure a priority list, after the command show int s0, the following
is displayed:
Queueing strategy: priority-list 1
Output queue: high 0/10/0, medium 0/40/0, normal 0/80/0, low 0/80/0
what do the numbers means 0/10/0 ....etc?
I've assign telnet to the high queue to prevent delay.
default is normal.
Thanks
--
Jacques Lee
CCNA
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
